Description

A beautiful and sleek exhibition stand of 6x3 meters that you can build yourself in no time? It is possible with the isyLED 8.1 "do-it-yourself" stand construction system.

This system is light in weight and you can quickly build it up without tools. The aluminum frames with a depth of 80 mm can also be fitted with integrated LEDs. This illuminates the prints from the inside, which gives a beautiful effect. You build this intermediate position (open on one side) from both frames where the prints are illuminated from above, and frames that are illuminated from the inside. It is precisely this combination that ensures a beautiful end result. The two counters are also models in which your print is illuminated from the inside.

Combine, adjust, resize

Exhibition stands built from the isyLED 8.1 system are easy to adapt to the space, target group and situation. For example, by omitting elements you can make the stand smaller, or by adding elements and parts, you can make it larger. You can also easily adjust the printing, and thus the appearance of the stand. By changing the printed cloths you can create a whole new look at little cost.

The printed cloths for your stand - that's how we make them

The cloths are very important with this type of stand system. Because they completely cover the system, you can hardly see the frame that is behind it.

Two types of printed fabrics are used in this stand design:

• Backlit fabrics – these are intended to be lit from within the frames and allow just the right amount of light to pass through
• Block-out fabrics for the side walls with spotlights - these fabrics are light-tight and therefore do not let light through.

For the printing of both types of fabrics, we use a printing process called "thermo-sublimation printing". The ink is applied to the cloth at a high temperature, so that the ink penetrates into the fibers of the fabric. As a result, your prints have a very long shelf life and you can fold and hang them again and again.

Fire retardant fabric printed with water based ink

The fabrics we use for both the backlit fabric and the block-out fabric are fire retardant (B1 standard). For environmental reasons, we print with water-based inks.

Would you like to know more about this design or system, or have a custom design made?

Call us for a no-obligation advice!